User's Manual

INSTALLATION
SPEAKER RECEIVERS
TRANSMITTER 1. Insert 6 pieces ‘AA’ size ALKALINE battery into the battery compartment
with correct polarity at the rear of the speakers or connect the 12V
power adaptor to the DC input jack on the rear of each speaker, then
plug it to the wall AC outlet.
1. Connect the supplied AC power adaptor to an electrical wall outlet.
2. Plug the AC power adaptor in the DC jack located on the rear of the
transmitter.
3. Turn on the transmitter by set the POWER switch to ON position, and
the POWER LED on transmitter will light up.
4. The retractable audio cord that located at the front of transmitter can be
connected to audio output jack MP3 / CD / VCD / DVD players.
2. Switch on the speakers by press the POWER button. The POWER
LED will light up. Switch off the speakers by press the POWER button
again.
OPERATION
1. Turn on the audio source (TV or audio component) to which the
transmitter is connected with.
2. Turn on the transmitter by set the POWER switch to ON position, and
the POWER LED on transmitter will light up.
Plug the adaptor in the AC source and connect the audio plug to the audio
source. As soon as the transmitter is receiving the audio signal, it will
automatically switch on and the Signal LED (Green) will illuminate.
3. Select the channel 1, 2 or 3 of the transmitter for best performance in
your location.
P. 6
P. 5