Specifications

6
Rules For Safe Operation (2)
Remove test leads, temperature probe and test clip
from the Meter and turn the Meter power off before
opening the Meter case.
When servicing the Meter, use only the same model
number or identical electrical specifications
replacement parts.
The internal circuit of the Meter shall not be altered
at will to avoid damage of the Meter and any accident.
Soft cloth and mild detergent should be used to clean
the surface of the Meter when servicing. No abrasive
and solvent should be used to prevent the surface of
the Meter from corrosion, damage and accident.
The Meter is suitable for indoor use.
•
•
•
•
•
International Electrical Symbols
AC (Alternating Current)
DC (Direct Current)
AC or DC
Deficiency of Built-In Battery
Continuity Test
Diode
Grounding
Capacitance Test
Double Insulated
Warning. Refer to the Operating Manual
Conforms to Standards of European Union
Model UT205/UT206: OPERATING MANUAL