User Guide

Operation PerformedButton
The Meter is at the DCV – 400mV range or ACV
-4V range after returning from the Hz% cycle
measurement mode.
2. At Hz range
Press the button to step through frequency and
duty cycle measurement mode.
REL (UT206A only)
Press REL to enter and exit the REL mode in any
measuring mode except in frequency and duty cycle,
the Meter beeps.
UT206A: Switches between AC voltage and DC
Voltage measurement, and continuity and diode
measurement; the Meter beeps.
UT205A: Switches between continuity and diode
measurement; the Meter beeps.
SELECT
Hz% (UT205A only)
Model UT205A/206A: OPERATING MANUAL
12