Specifications

Model UT60H: OPERATING MANUAL
22
Measurement Operation(8)
F. Testing for Continuity (see figure 6)
(figure 6)
Warning
To avoid harms to you, please do not attempt to input
voltage higher than 60V DC or 30V rms AC.
To avoid damages to the Meter or to the devices under
test, disconnect circuit power and discharge all the
high-voltage capacitors before measuring continuity.
Note
l Open circuit voltage around –1.2V and range is 400Ω
measurement range.When continuity testing has
been completed, disconnect the connection between
the testing leads and the circuit under test and remove
the test leads away from the input terminals.