Specifications

[e-mail]
24
Remarks:
z
Frequency Response: 40Hz ~ 400Hz
z
Displays effective value of sine wave (mean value response).
ii. Under Scope mode
z
The specification is same as Bi Under Multimeter mode.
z
On the top right corner of the display shows the accuracy of the frequency which is around ±2%.
When the LCD displays 1-10 period waveform, the reading is valid, otherwise the Meter displays “ ———
—“
C. DC Current
Range
R
esolutio
n
Accuracy Overload Protection
400μA 0.1μA
±(1%+8)
0.5A, 250V, fast type fuse,
ø5×20mm
4000μA 1μA
40mA 10μA
±(1.2%+8)
400mA 100μA
4A 1mA
±(1.5%+8)
10A, 250V, fast type fuse,
ø5×20mm.
(Continuous measurement ≤ 10
seconds and interval more than 15
minutes.)
10A 10mA
D. AC Current
i. Under Multimeter mode
Range
R
esolutio
n
Accuracy Overload Protection
400μA 0.1μA
±(1.5%+8)
0.5A, 250V, fast type fuse, ø5×20mm
4000μA1μA
40mA 10μA
±(2%+8)
400mA 100μA
4A 1mA
±(2.5%+5)
10A, 250V, fast type fuse, ø5×20mm
(Continuous measurement ≤ 10
seconds and interval more than 15
minutes.)
10A 10mA
Remarks:
z
Frequency Response: 40Hz~400Hz.
z
Displays effective value of sine wave (mean value response).
ii.
Under Scope mode
z The specification is same as Di Under Multimeter mode.
z
On the top right corner of the display shows the accuracy of the frequency which is around ±2%.
When the LCD displays 1-10 period waveform, the reading is valid, otherwise the Meter displays “ ———
—“