Specifications

3
1000V, CAT. III 600V) and double insulation.
Use the Meter only as specified in this operating
manual, otherwise the protection provided by the
Meter may be impaired.
In this manual, a Warning identifies conditions and
actions that pose hazards to the user, or may damage
the Meter or the equipment under test.
A Note identifies the information that user should pay
attention on.
Rules For Safe Operation(1)
Warning
To avoid possible electric shock or personal injury,
and to avoid damage to the Meter or to the
equipment under test, adhere to the following
rules:
z Before using the Meter inspect the case. Do
not use the Meter if it is damaged or the case
(or part of the case) is removed. Look for
cracks or missing plastic. Inspect the
insulation around the connectors.
z Inspect the test leads for damaged insulation
or exposed metal. Check the test leads for
continuity. Replace damaged test leads with
identical model number or electrical
specifications before using the Meter.
z When using the test leads, keep your fingers
behind the finger guards.
z Do not apply more than the rated voltage, as
marked on the Meter, between the terminals
or between any terminal and grounding.
z When the Meter working at an effective
voltage over 60V in DC or 30V in AC, special
care should be taken from there is danger of
electric shock.
z Use the proper terminals, function, and range
for your measurements.
z The rotary switch should be placed in the
right position and no any changeover of
72-9375: OPERATING MANUAL