Technical Specifications

Metric Imperial Metric Imperial
Density
670 - 720 kg/m³ 42 - 45 lb/ft³
Internal Bond
0,79 N/mm² 115 psi 0,47 N/mm² 68 psi
MOR
22,0 N/mm² 3 190 psi 12,4 N/mm² 1 800 psi
MOE
2 970 N/mm² 430 800 psi 1 241 N/mm² 180 000 psi
Screw Holding
Face (≥ 3/8") 1 060 N 238 lb 703 N 158 lb
Edge (≥ 5/8") 1 020 N 229 lb 601 N 135 lb
Moisture Content
Thickness Tolerance : Metric Imperial
from specified thickness
± 0,125 mm ± 0,005 in
from panel average
± 0,125 mm ± 0,005 in
Length/Width
± 2,0 mm ± 0,080 in
Linear Expansion
Uniboard MDF meets the requirements of ANSI A208.2-2016/Grade 115, ECC 4-11, CARB ATCM 93120 and is available as FSC
®
certified
Uniboard MDF meets CARB phase 2 standards
*
Typical values measured at the Mont-Laurier plant
Revised : 2016-07-06
not specified
4-6 % ≤ 9%
≤ 0,33 %
Properties
Typical Value*
ANSI A208.2-2016 (Grade 115)
Standard
Technical Specfications
Standard
Technical Specfications