Installation guide

Unibrain Fire-i digital camera Quick Installation Guide
16
Even if the FireWire bus is already powered, the DC power input jack of the camera can also be used to
reinforce it (this may be needed for example when using cables longer than 10m to connect one camera
with a workstation). The FireWire bus voltage will adapt automatically when needed. A built-in diode
avoids any risk of voltages conflict or reverse current flow.
Recommended DC adapter must provide stable regulated output voltage of at least 12VDC, 1 A or best
15VDC, 1.5A. To match camera DC input connector, the jack plug of the DC adapter need following
dimensions and polarity as on the figure.
Your may purchase such power adapter separately,
from Unibrain using order part number: #1611
(An appropriate US or European power cord is also provided)