User's Manual

11. Int./Format/Prog. Button: Press this button to page handset or change CID number
format on screen, or when you are registering a new handset to the base.
12. Mem./Back: Press this button to go into phonebook mode or to go back to previous
menu during menu mode.
13. Mute/Del.: Press this button to temporarily disable the microphone during Talk /
Intercom / Conference mode or to delete record/character.
14. Ring Off Button: Press this button during ringing to temporarily disable the ringer, or
set line1 and line2 ringer to off if pressed during Standby mode.
15. Redial/Pause: Press this button to redial the last number you have dialed, or to insert
pause while dialing.
16. Menu/Hold Button: Press this button to access phone setup options menu or hold
the line.
17. L1-In-Use LED Indicator: This is a dual color LED indicator, the Red LED blinks
when you have new line1 CID message(s) or during line1 ringing/paging/on hold/
branch phone in use, and turn on steadily for line1 Talk mode; the Green LED blinks
to indicate message waiting in line1 voice mailbox.
18. L2-In-Use LED Indicator: This is a dual color LED indicator, the Red LED blinks
when you have new line2 CID message(s) or during line2 ringing/paging/on hold/
branch phone in use, and turn on steadily for line2 Talk mode; the Green LED blinks
to indicate message waiting in line2 voice mailbox.
19. L1 Button: Press this button to answer a line1 incoming call, place a line1 call or end
a line1 call.
20. L2 Button: Press this button to answer a line2 incoming call, place a line2 call or end
a line2 call.
21. Flash Button: Press this button during off hook mode to send a timed line break to
phone line to access custom calling features such as Call Waiting or three-way calling
provided by your local phone company.
22. L1 Ans. On/Off LED Indicator: It turn on steadily during line1 TAD answer on mode.
23. L2 Ans. On/Off LED Indicator: It turn on steadily during line2 TAD answer on mode.
24. L1 Ans. On/Off Button: Press this button to switch the line1 TAD to answer on/off
mode.
25. L2 Ans. On/Off Button: Press this button to switch the line2 TAD to answer on/off
mode.
26. TAD Operation Buttons: Press these buttons to operate the answerer to playback
message, skip to next message, repeat current message, back to previous message,
erase current message, erase all old message(s), record line1 or line2 welcome
message and record memo. message.
MOUNTING POSITION
DESKTOP USE:
If you have a 4 conductors dual line telephone wall jack, use the bundled telephone line to
connect the L1/L2 line jack to the dual line wall jack, the 2lines connection is completed.
If you have 2 seperated single line telephone wall jack, use the bundled telephone lines to
connect the corresponding L1/L2 line jack and L2 line jack to the 2 seperated wall jacks,
then the 2lines connection is completed.
9