User's Manual

ManualsBrandsUnical Enterprises ManualsElectronics5.8GHz/2.4GHz FHSS Cordless Phone w/ CID (Handset)

RINGER TONE

This telephone offers each line 5 ringer tones for user to select.

1. During Standby mode, press MENU button;

2. Press DOWN button until “RINGER TONE” option is pointed by the pointer;

3. Press MENU button;

4. Press UP or DOWN button to select the line1 ringer tone (1-5) you desire;

5. Press MENU button to advance to line2 setting;

6. Press UP or DOWN button to select the line2 ringer tone (1-5) you desire;

7. Press MENU button to save the setting;

8. Press BACK button to go back to Standby mode.

NOTE: once a ringer tone (1~5) is selected on either of the lines, the same ringer tone will

be skipped automatically on another line during selection.

AREA CODE

This telephone allows you to input your local area code of each line, during CID list review

mode, LAC will be hidden in default display mode of the matched LAC case.

1. During Standby mode, press MENU button;

2. Press DOWN button until “AREA CODE” option is pointed by the pointer;

3. Press MENU button;

4. Press 3 digits local area code;

5. Press MENU button to advance to line2 setting;

6. Press 3 digits local area code;

7. Press MENU button to save the setting;

8. Press BACK button to go back to Standby mode.

REGISTERING A HANDSET (applicable to handset only)

If your handset is not registered to a base unit, or you found problem when making

communication with the base unit, you can register the handset to your base once more

unconditionally.

1. During Standby mode, press MENU button on the handset;

2. Press DOWN button until “REGISTRATION” option is pointed by the pointer;

3. Press MENU button to select registration option;

4. Press MENU button to select registration of own handset;

5. Press MENU button to confirm;

6. Press and hold base unit PROG button until handset beeps;

7. Press numeric keypad to enter username by multi-tap input (max. 15characters);

8. Press MENU button to save the input.

NOTE: for the operation of multi-tap input, please refer to Telephone Keypad Characters

section for more detail.

NOTE: if you found communication problem with the base in more than one handset, please

try to deregister all handsets using the following procedures and register those handsets

one by one using the procedure described in REGISTERING A HANDSE section above.

DEREGISTERING ALL HANDSETS

1. Press and hold the PROG button until Charge LED blinks slowly (like registration);

2. Release button and then press and hold the PROG button again until Charge LED

blinks quickly;

3. Release button and press once quickly the PROG button again, when all deregistration

procedures are completed, base will show “ALL HANDSETS DEREGISTERED”

and handsets will show “REGISTER HANDSET?”.

DEREGISTERING A HANDSET (applicable to base unit only)

If you want to move a handset to work with another 35828A base, you can deregister the

handset from current base and then register to another base unit.