User's Manual

FLASH FUNCTION

• Used to access custom calling features such as Call Waiting or Three-Way Calling

provided by your local phone company. Flash can also be used to restore a dial tone

to make a new call.

OUT OF RANGE WARNING

• The handset and base unit communicate up to a certain maximum range. The distance

can be affected by weather, power lines, or even other cordless telephones.

• If you far away from the base unit, the handset will show “OUT OF RANGE” on the

LCD display to warn you that bit error rate is too high for proper communication between

the handset and the base unit.

• When you hear no voice and see the“OUT OF RANGE” display, you should move

closer to the base unit. Otherwise, the call will automatically cut off after 30 seconds.

LOW BATTERY WARNING

• When the handset battery voltage level is low, the handset LCD display shows

“BATTERY LOW!”.

• Return the handset on the base cradle or charge cradle for charging.

TELEPHONE KEYPAD CHARACTERS

The TELEPHONE KEYPAD buttons (0~9) are used to enter characters using multi-tap

input when entering names. Press the appropriate KEYPAD button consecutively to get

the following characters.

Multi-tap example: If you want to enter the character “C”, press the KEYPAD button ‚,

the first character displayed will be “A”. Press the button ‚ again within 1 second to

display “B”, and press again within 1 second to display the letter “C”. To enter the next

character, press the appropriate button. If, however, the next character is on the same

button as the previous character, you will need to wait for 2 second until the cursor shifts. If

you want to change any character, you can go backward by pressing DEL button to erase

the inputted characters one by one.

PHONEBOOK OPERATION

SAVING IN THE PHONEBOOK

All phonebook operation is the same on handset and base unit, the phonebook memories

are independently stored in their own non-volatile memories.

1. Press the MEM button.

2. Press UP/DOWN button to select location, or enter 2 numeric digits to select location

directly (01~20 on base unit, 01~30 on handset).