User's Manual

RECEIVING NEW CALL
• When you receive a new call, the call information is stored under CALLER ID List. The
“NEW” segment of LCD display will turn on and Red new call(s) LED will blinks
slowly if there is unread new call(s) in the caller list (the line1 new call is indicated by
the red LED under the L1 button while the line2 new call is indicated by that under L2
button).
• When you receive a call, the system displays the caller information sent by the telephone
company, called a Call Record. The Call Record consists of the following information.
a. The caller’s name (if available)
b. The caller’s telephone number
c. The time and date of a call
d. The line of a call
VIEWING THE CALLER ID LIST
• In Standby mode, press UP/DOWN button to enter Caller ID list. If there is new call(s),
the “NEW CALL 03” prompt will be displayed at first where “03” is indicating
number of unread Caller ID record in the caller list.
• Press UP or DOWN button to scroll to the next call. The DOWN button will go through
the calls from the last call received to the first. The UP button will allow you to view the
calls from the first call received to the last. When viewing the caller records, their line
of call information is indicated by the red LED under the L1 and L2 button.
• Press BACK button to finish review.
NOTE: If no active buttons are pressed for 60 seconds, the display will automatically return
to Standby. If you press the UP/DOWN button within 60seconds after back to Standby, it
will resume to the previous record in the Caller list, this will ease the “slow” user to go
through the caller list without scrolling back to previous record by too many key strokes.
CALLER ID DISPLAY
12:35AM 11/30 L1
123-845-3892
JOHN SMITH
LCD display shows name and number, time and date of the call.
12:35AM 11/30 L1
123-845-3892
LCD display shows number-only service.
12:35AM 11/30 L2
UNKNOWN CALLER
“UNKNOWN CALLER” will be displayed when Caller ID information is not available. This
22