User's Manual
English
1. English is the default voice
prompt.
2. Greeting message (OGM
1): “Your call can not be
answered at the moment.
Please leave a message after
the tone”.
3. Answers all incoming calls on
the 4th ring.
4. No time stamping on new
messages unless you have
subscribed to phone company
CID service or you have set
the date / time function.
5. Remote Code (password) for
remote message retrieval is “0
0 0 0”.
6. The following display
characters (or messages) are
used by TAM:
• CA=Call(newcallringing)
• An=Answering(TAMis
answering)
• rE=Recording(recording
a memo or OGM)
• SP=Speaker
(speakerphone mode)
• rA=RemoteAccess(TAM
is being accessed
remotely)
• UU=Mute(microphoneis
muted in speakerphone
mode)
• rg=Registration
(registration mode for
handset)
• r4=Settoanswerin4
rings
• PA=Pause
• A1=Answeringmessage1
(OGM 1)
• A2=Answeringmessage2
(OGM 2)
• L1toL9=volumelevel1
to 9
• HS=PagingHandset
• HS=Handsetisaccessing
TAM function
• PL=Pleasesetdateand
time,
• FU=Answeringmachineis
full
27. ANSWER MACHINE ON/OFF
1. Press
Answer On/Off
key to choose
between answer machine On
or Off. It will announce
“Answer On” or “Answer
OFF”.
2. If the machine is off, a “- -“
will be shown on the digital
display.
3. If the machine is on, the digital
display shows “0 0 “ or the
number of message received.
(A ashing display indicates
the number of new messages
received; a non-ashing
display indicates the number
of saved messages.)
28. SELECTING A FACTORY OUT-
GOING MESSAGE (OGM)
Two factory OGMs are provided
for greeting. The user can
select either OGM 1 or OGM 2
as greeting message. (Factory
default is OGM 1.)
OGM 1: “Your call can not be