User's Manual

English
proper ring volume (5 levels)
13. Press
key to conrm the
new selection and a sound of
“di du” indicates a successful
selection.
14. Press
key to exit to standby
mode
72. KEYPAD TONE AND WARNING
TONE SETTING
1. While off-line, press
key
and the screen displays
“CALL LOG”.
2. Press
or key to scroll to
“HS SETTINGS”.
3. Press
key to conrm.
4. Press
or key to scroll to
“TONE SETUP”.
5. Press
key to conrm.
6. Press
or to display
either “KEY TONE”,
“BATTERY LOW” or “RANGE
ALARM”
Key Tone select
7. While “KEY TONE” is shown,
press
key and the screen
displays either “ON” or “OFF”.
8. Press
or to display
“ON”
9. Press
key to conrm and
the screen displays “KEY
TONE” again.
10. Press
key to exit to off-line.
Battery Low Warning Tone
Detailed setting step is similar to
that of setting the KEY TONE.
(Note: While talking, there will be
a “di” sound when the battery
is low if the this ALARM is set
to ON. While off-line, there will
be no alarm sound; only battery
capacity symbol is displaying on
screen.)
Out-Of-Range Warning Tone
Detailed setting step is similar to
that of setting the KEY TONE.
(Note: While talking, there will
be a long “di” sound when the
handset is out-of-range from the
base if the RANGE ALARM is set
to ON.)
73. FORWARD AN INCOMING CALL
FROM HANDSET 1 TO HANDSET 2
1. On Handset 1, press
PAGE
key and then press “2” on the
keypad. This pages Handset
2 while putting the outside call
on HOLD.
2. When Handset 2 rings, press
TALK
key on Handset 2 to
answer the page.
3. Over the intercom, tell
Handset 2 that an outside call
is waiting.
4. Press
key on Handset 1
to transfer the call and then
press
key on Handset 1 to
exit.
(Note: If within 30 seconds
there is no answer, the call will
ring back to Handset 1.)
74. CONFERENCE CALL
This allows two handsets
conferencing with the incoming
caller.