User's Manual

English
Selecting a Language:
The VM-150 announces all voice prompts in 3 languages--
English (Default), French & Spanish. If you like to select
these voice prompts in French or Spanish, follow these
steps:
1. While in the standby mode, press and hold “VOL
+” for 3 seconds until it announces “French is
selected” (in French).
2. To select Spanish , repeat step 1 until it announces
“Spanish is selected” (in Spanish).
3. To select English, repeat step 1 again until it
announces “English has been selected”
Set Security Code:
The factory default security code is 0000, to overwrite and
set your own security code, follow these steps:
1. While in standby mode, press “CODE” key once,
the machine will then announce your current code
“Yoursecuritycodeis0000.
press and hold “CODE” key for 3 seconds until it
announces “Security Code setting, the rst digit,
0”. Press “Vol+ or Vol- “ keys to select the number
(shown on the display) you want. Press the “CODE”
key to conrm.
2. The machine announces; “the second digit, 0”.
Press again the “VOL+” or “VOL-” key to choose a
number as the second digit, then press “CODE” key
to conrm.
3. Repeat the above steps for the 3rd and 4th digits.
4. After conrming the 4th digit of the new security
code, the machine will instantly announce the new
securitycode;i.e.“YoursecuritycodeisXXXX”and
returns to standby mode.
Note: During security code setting, if no key is
input within 8 seconds, the set up procedure will be
abandoned.
Remote message retrieval:
1. Call the number where you have your VM-150. Wait for
the OGM (Out Going Message) to nish and you hear the