User's Manual

10
Iftheydon'tfindeachother,referto"Handsetregistration"below.
Note:DonotusethephoneuntiltheinitializationsequenceiscompleteandtheHandsetshows
X1500HSS1.
Handsetregistration
Youcanregisteruptosixhandsetstothebasestation,includingtheonepresetregisteredhandset
in the package. Each new handset must be electronically registered with the base station.
Note: The handset included in this package is pre-registered at the factory with the base
station.YoudonotneedtoperformthefollowingRegistrationprocedure.However,ifit
becomesderegistered,usethisprocedure.
Register
1
 Onthehandset,press
Menu
(F2),scrollto
Handset Setup
and press
Enter
(F1).
2
Scroll to
Registration
and press
Enter
(F1).
3
The display shows
New Register
. Press
Enter
F1 again. The display will show
Please Wait.
4
Press and hold PAGE/REGforvesecondsuntilIN-USERightGreenLED on base station blinks.
5
Then press F1 (
Enter
) on the handset. A "Please Wait" message appears and a few
secondslater,theHandsetwillfindthebaseanddisplay"Select.."and"BaseID:"
Example,01:9C:AO:00:B8(yourindividualbaseIDwillvary,butwillbeinthisformat).
6
AfterHandsetdisplaysSelect..andBaseID,pressF1again.A"PleaseWait"message
appears while the Base and Handset are paired.
 Registrationtakesjustafewseconds.Whenregistrationiscompleted,youhearatone
and"X1500HSS1,orX1500HSS2,etc."appearsontheLCDscreenontheHandsetbeing
registered.
Standby Screen
Whenthesequenceiscomplete,theStandbyScreenappearsasshown
in the picture on the right. This screen is always visible when the phone
isidle.Atthebottomofthescreenthetextindicateswhichservicelines
are active.
CEL
iswirelessservice,and
TEL
is landline service.
The
CEL
indicatormaytakeuptotwominutestoappear,depending
on cellular signal conditions in your area.
The handset displays CEL for cellular service and TEL for conventional
landline only if you subscribe to these services and activate the
cellular service (CEL) or plug your X1500 base TEL LINE to telephone wall jack with a
telephone cord and you are a current customer for landline service.
Ifyouhaveconnectedwithyourcellularserviceprovider,thedateandtimemaybeset
automatically.
Cellular Activation
Dependingonyourcarrierofchoiceforyourwirelessservices,youmayhaveadifferent
distinctive activation method for your X1500.
HANDSET 1
01/01 10:10
CEL Menu TEL