User's Manual

21
Usingredial
Each handset holds the last 10 numbers dialed. Each number can have up to 32 digits.
Call from redial log
1
Press RDL/P to recall the last dialed number.
2
Press
CEL
(F1) or
TEL
(F3) to redial the number.
UsingSpeeddial
1
Set up keys 0–9 with numbers in the Phone book for speed dial.
2
 Pressandholdtheappropriatenumberkey,thenpress
CEL
(F1) or
TEL
(F3).
Ifyouneedtoaddorremovethenumber1ortheareacodeforproperdialinginyourarea,
see“Add/removea1”or“Add/removeareacode”onpage30.
Callingoptions
Pause
Whileenteringaphonenumber,pressRDL/P to add a 0.5 second pause. The pause is added
as the digits are transmitted when dialing. Press RDL/P again to make the pause longer. The
letter
P
appears in the number each time you enter the pause.
Mix dial
If your phone is set to pulse dialing and you need to send DTMF tones during a call (to use
anautomatedresponsesystem,forexample),youcantemporarilyswitchtotonedialing
after the call connects.
1
Make your call normally.
2
 Onceyourcallconnects,press
*
on the handset to temporarily switch to tone dialing.
 Whenthecallends,thephoneautomaticallyreturnstopulsedialingmode.
In-Call operations
Place a call on Hold
• Press
HOLD
(F1) to place a call on hold.
• Press
BACK
(F3) to return to the call.
Mute a call
• Press
MUTE
(F3) to temporarily cut off the microphone.
• Press
UNMUTE
(F3) to return to the call.
0123456789
CEL Menu TEL