User's Manual

23
PageandIntercom
ThePagefeatureletsyoulocatethehandsetifitismisplaced,butitalsocanbeanswered
by the handset.
* During page/intercom, if another incoming call is received, page/intercom action will be canceled�
* Page/intercom ring tone and volume cannot be changed�
Page
1
Press PAGE/REG on the base station.
 Alltheregisteredhandsetsbeepforupto60seconds,and
HANDSET LOCAT...
appears
on the display.
2
 Tostopthepage,presseither
End
(F1) or
End
(F3)onanyhandset,orpressPAGE/REG
on the base station.
Intercom
1
 Whenthelineisnotinuse,pressINTCOM,scrolltothehandsetyouwanttotalkto,and
press
Enter
(F1).
The handset beeps for up to 60 seconds and
Paging Handset 1
appears on the display.
2
 Toanswer,press
Enter
(F1) to connect with Intercom.
 DuringanIntercomconnection,useMutetoturnoffthemicrophoneonthehandset.
Barge-in
WhetheryourhandsetisinthemiddleofacallonCELorTEL,thisfeatureallowsanyoneof
the other registered handsets to the same X1500 base station to join the call. Before using
theBarge-Infeature,pleasereadthefollowingprocedures.
• TheX1500comeswiththeBarge-In
feature set to "off." It must be activated
before use.
• Ifpowertothebasestationisinterrupted,
Barge-In must be reactivated.
• Thefirsthandsettoplacethecallisthe
“master”andfullycontrolsthecall.Other
registered handsets that join the call are
“slaves”andcanonlyjoinorexitthecall.
Note:RememberthatwithBarge-Inactivated,privacymaybecompromised.Anyregistered
handsetcanjointhecall,andthereisnoindicationthatanotherhandsethasjoinedthecall.
PSTN
Handset 1
Base
CEL
TEL
HANDSET 1
01/01 00:00
CEL Menu TEL
Handset 2
HANDSET 1
01/01 00:00
CEL Menu TEL
TALKTALK
TALK
BARGE-IN