User's Manual

7
Locating Your Base Station
Some important considerations:
• Chargethehandsetfor12–15hoursbeforeusingit.
• Placethebasestationwhereanadequatecellularsignalcanbereceived.
• Keepthebasestationandhandsetawayfromsourcesofelectricalnoise,suchasmotors,
fluorescentlighting,ormicrowaveovens.
Your HomeConneX X1500 is a two line phone that can employ both cellular service and
conventional landline service and operates like a two line phone. If you retain your landline
service and want the X1500 to operate as a conventional cordless telephone for landline
service,thenconnectthetelephonelinecordtotheTELLineportofthebasestationand
the other end to the telephone wall jack like any conventional cordless telephone. (This
connectionisrequiredonlyifyouwantX1500tooperateasatwowayphonebetweenTEL
and CEL or TEL only conventional cordless telephone.)
1
Connect the telephone line cord to the TEL LINE port and to a telephone wall jack. (This
connectionisrequiredonlyifyouwanttousethephonewithyourlandlineservice.)
2
Set the base station* on a desk or table.
* Base station can be placed in a vertical or horizontal position�
3
Connect the GPS Antenna to the GPS Antenna Jack on the side of the Base unit by pushing
the connector into the jack. Place the other end of the GPS antenna in a convenient
location.BecausetheAntennaendismagnetized,youcanaffixittoanymetalitem.
TheGPSantennaisusedforany911call,tohelpemergencyresponderstolocatethe
customer's position if he/she can't speak or give the 911 operator his/her location.
4
Find the base AC Adaptor (the larger Adaptor) and connect it to the DC 9.5V jack on the
baseandtoastandardwallACoutlet(100~240V,50/60Hz).
Power backup battery (Optional)
You can purchase an optional Li-ion battery from your AirTouch agent store for your X1500
base station (Model Number LIB150). Place this battery inside the X1500 base station battery
compartmentandwhenfullycharged,incaseofpoweroutage,thebasestationcanoperate
up to 40 minutes (depending on the battery condition) and provides automatic seamless hands
o in case you are having a conversation so that the conversation will not be interrupted.
1
Verify power is disconnected from the base station.
2
Open the battery cover on the back of the base station.
3
Verify that the connector is properly aligned with the jack and install and connect
thebattery.
4
Slide the switch to the "on" position to enable the battery backup function.
5
Replace the cover.
Note:
• Batterynotincluded.
• Batteryisnotrequiredtooperatetheproduct.
• RedPWR/BATLEDonbasestationislitwhilethebasestationisoperatingwithbackuppower.
• ThebatterypowerisactivatedautomaticallywhencurrentfromtheACAdaptorisinterrupted;
unpluggingtheACAdaptordoesnotturnoffpowertothephonewhenthebatteryisconnected.
• Besuretoremovethebatterywhendisconnectingpower.