User`s manual

Product Specifications
Compliance:
Transfer Rate:
Connector:
PoE pin assignmnet:
Network Cable:
Dimension:
Ventilation:
Standard
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3x Flow Control
IEEE 802.3af/at Power over Ethernet
14,880 pps for 10Mbps
148,800 pps for 100Mbps
10/100TX: 5 x RJ-45 with auto MDI/MDI-X funtions;
Port 2~5 support PoE injector function
V+ (RJ45 Pin 4, 5), V- (RJ45 Pin 7, 8)
MAC Address:
LED Indicator:
Switching capacity:
1K MAC address table
1G
Per port: Link/Activity
Per PoE port: PoE
Per unit: Power
2-pair UTP Cat. 5e cable (100m),
EIA/TIA-568 100-ohm STP (100M)
92mm x 68mm x 24mm (W x D x H)
Fanless
Operating Temp:
Operating Humidity:
Power Supply:
Power Consumption:
EMI:
0to45 32to113℃℃(℉ ℉)
10% to 90% (Non-condensing)
External power supply
Input: AC100~240V; Output: DC 48V, 1.35A
65 Watt
FCC Class B, CE
FCC Statement
6
This equipment has been tested and found to comply with the limits for a class B
device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a commercial installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with instructions, may cause harmful
interference with radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case, the user will
be required to correct the interference at the user’s expense.