User`s manual

ENDAT-2794A USERS MANUAL

UNICORN COMPUTER CORP.

Jumpers Overview:

LCD Voltage Select JP6

LCD Backlight Voltage Select JP9(Pin3-5)

LCD Backlight Control Voltage Select JP9(Pin6-8)

LVDS1

LCD Backlight Voltage (for +3.3V) JP9(Pin9-10)

LCD Voltage Select JP7

LCD Backlight Voltage Select JP14

LCD Backlight Control Voltage Select JP12

LVDS2

LCD Backlight Voltage (for +3.3V) JP9(Pin1-2)

Clear CMOS JBAT1

COM1/2/3/4 Voltage Selector JP5, JP4

RS232 / 485 Selector for COM2 JP2, JP3

Header for Case Panel JP8

HDD LED JP8: Pin 1(-), Pin 2(+)

External Speaker JP8: Pin 3(-), Pin 6(+)

Buzzer On/Off JP8: Pin 4, Pin 5

Hardware Reset Switch JP8: Pin 7, Pin 8

ATX Power Supply On/Off Switch JP8: Pin 9, Pin 10

Power LED JP8: Pin 11(-), Pin 12(+)

WDT Function Enable/Disable JP8: Pin 13, Pin 14

Please double-check the insertion and orientation of the LCD cable before applying power.

Improper installation will result in permanent damage LCD panel.

Part 1: Onboard Jumpers

JBAT1: CMOS Data Clear (1x3 with 2.0mm)

Pin 2-3 * Normal

Pin 1-2 Close for clear CMOS

JP2, JP3: RS232 / 422 / 485 Selectors for COM2 (2.0mm)

TYPE JP2 (3x4 with 2mm) JP3 (2x3 with 2mm)

RS-232 * 1-2, 4-5, 7-8, 10-11 1-2

RS-422 2-3, 5-6, 8-9, 11-12 3-4

RS-485 2-3, 5-6, 8-9, 11-12 5-6