User`s manual

ENDAT-2794A USERS MANUAL

UNICORN COMPUTER CORP.

˙IDE Channel Master/Slave

Configure your IDE/SATA devices by using one of the three methods below:

Auto: Lets BIOS automatically detect IDE/SATA devices during the POST.

(Default)

None: If no IDE/SATA devices are used, set this item to None so the system will

skip the detection of the device during the POST for faster system

startup.

Manual: Allows you to manually enter the specifications of the hard drive when

the hard drive access mode is set to CHS.

˙Access Mode

Set the hard drive access mode. Options are: Auto (default), CHS, LBA,

and Large.

3-2. Advanced BIOS Features

This section allows you configuring your system for basic operation. You have the

opportunity to select the system’s default speed, boot-up priority, keyboard

operation and security.

˙Hyper-Threading Technology

Item Optimized defaults

CPU Feature Press Enter

Hard Disk Boot Priority Press Enter

Virus Warning Disabled

Hyper-Threading Technology Enabled

Quick Power On Self Test Enabled

First Boot Device Hard Disk

Second Boot Device CDROM

Third Boot Device Removable

Boot Other Device Enabled

Boot Up NumLock Status On

Gate A20 Option Normal

Typematic Rate Setting Disabled

Typematic Rate (Chars/Sec) 6

Typematic Delay (Msec) 250

Security Option Setup

APIC Mode Enabled

MPS Version Control For OS 1.4

OS Select For DRAM > 64MB Non-OS2