User`s manual

ENDAT-2794A USERS MANUAL
UNICORN COMPUTER CORP.
28
OnChip IDE Device
Item Available Options:
IDE HDD Block Mode Enabled
IDE DMA transfer access Enabled
On-Chip Primary PCI IDE Enabled
IDE Primary Master PIO Auto
IDE Primary Slave PIO Auto
IDE Primary Master UDMA Auto
IDE Primary Slave UDMA Auto
On-Chip Secondary PCI IDE Enabled
IDE Secondary Master PIO Auto
IDE Secondary Slave PIO Auto
IDE Secondary Master UDMA Auto
IDE Secondary Slave UDMA Auto
*** On-Chip Serial ATA Setting ***
On-Chip Serial ATA Auto
SATA Port Speed Settings Disabled
PATA IDE Mode Secondary
SATA Port P0,P2 is Primary
˙IDE Primary Master/Slave PIO and IDE Secondary Master/Slave
PIO
The four IDE PIO (programmed Input/Output) fields let you set a PIO mode (0-4)
for each IDE device that the internal PCI IDE interface supports. Modes 0
through 4 provide successively increased performance. In Auto mode, the
system automatically determines the best mode for each device.
˙IDE Primary Master/Slave UDMA and IDE Secondary
Master/Slave UDMA
These fields allow you to set the Ultra DMA in use. When Auto is selected, the
BIOS will select the best available option after checking your hard drive or
CD-ROM.
Notice: The Secondary IDE channel is not available for this board. All
settings of Secondary IDE channel will be ignore by system BIOS.
˙
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sectors
read/write.