User`s manual

ENDAT-2794A USERS MANUAL

UNICORN COMPUTER CORP.

˙ACPI Function

This function should be enabled only in operating systems that support ACPI.

Currently, only Windows® 98SE/2000/ME/XP supports this function. When this

field is enabled, the system will ignore the settings in the “Suspend Mode” and

“HDD Power Down” fields. If you want to use the Suspend to RAM function,

make sure this field is enabled then select“S3 (STR)” in the field below.

˙ACPI Suspend Type

This field is used to select the type of Suspend mode.

S1(POS) Enables the Power On Suspend function.

S3(STR) Enables the Suspend to RAM function.

S1 & S3 If S3 state is supported by the system, by default [S3] is

automatically selected. Otherwise [S1] is selected.

Resume On RTC Alarm

When [Enabled], your can set the date and time at which the RTC

(real-time clock) alarm awakens the system from suspend mode.

˙Power Management

This field allows you to select the type of power saving management modes.

˙Video Off Method

This field defines the Video Off features.

Blank Screen Writes blanks to the video buffer.

V/H SYNC + Blank Enables the Suspend to RAM function.

DPMS Allows BIOS to control the video display.

˙Soft-Off by PWR-BTTN

This field defines the power-off mode when using an ATX power supply.

3-6. PnP/PCI Configurations

This section describes the configuration of the PCI bus system. PCI is a system

that allows I/O device to operate at speeds nearing the speed of the CPU itself,

when communicating with its own special components. This section covers some

very technical items. It is strongly recommended that only experienced users make

any changes to the default settings.