PhotoViewer with Outlook Sync USER MANUAL DPF-1102R PLEASE READ THIS OPERATING MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
SAFETY INFORMATION Read this user guide carefully to ensure proper use of the product and to avoid any danger or physical damage. - Do not use the viewer in extremely hot, cold, dusty and moist environment. Do not drop the viewer, this could cause external damage or damage to internal components. Do not repair the viewer by yourself, or it will cause damage. Do avoid getting the viewer wet or drop it in water.
LOCATIONS OF CONTROLS KEY NAME FUNCTIONS OF KEYS UP Item switch - Value increase while inputting DOWN Item switch - Value decrease while inputting LEFT Item switch - Cursor move left while inputting RIGHT Item switch - Cursor move right while inputting MENU Outlook, Shopping List, Calendar, Gallery ON/OFF Press and hold to turn off, Press and hold to turn on.
CALENDAR - TIME: ⋅ Time, date and week will be shown on clock mode SETTING DATE & TIME ⋅ In Time mode, Press and hold the [Confirm] key for 2 seconds to edit. ⋅ Press [Up]/[Down] key to select year (2000~2099) ⋅ Press [Confirm] key to confirm year. Then start set month ⋅ Press [Up]/[Down] key to select Month. ⋅ Press [Confirm] key to confirm month. Then start set day ⋅ Press [Up]/[Down] key to select day. ⋅ Press [Confirm] key to confirm day. Then start set hour ⋅ Press [Up]/[Down] key to select hour.
⋅ ⋅ ⋅ ⋅ USB mode Turn on the device. Connect the device to PC with the USB cable provided. Once the USB cable is plugged, it will enter USB mode and show the below screen. USB Charge USB Update ⋅ ⋅ ⋅ ⋅ ⋅ Press [Up]/[Down] key to select USB Charge or USB Update. Press [Confirm] key to confirm. USB Charge This unit uses built-in rechargeable lithium battery. Select USB Charge to charge up the rechargeable battery. ⋅ ⋅ ⋅ The battery animation on the screen shows that the unit is being charged.
ADDING / REMOVING PHOTOS WARNING: DON’T DIRECTLY READ/WRITE TO THE USB DEVICE USING OTHER PROGRAM. ONLY USE THE PC PROGRAM PROVIDED TO DOWNLOAD PICTURE TO THE PHOTO FRAME. DON’T FORMAT THE USB DRIVE; OTHERWISE THE UNIT WILL BE DAMAGE!!! Installation 1. Insert the CD to the CD drive. Installation software will start automatically. 2. If your CD does not have autorun, go to the setup directory and double click “PhotoViewer Setup.exe” to start. 3.
⋅ Click “Synchronize” to start download.
MS OUTLOOK SYNC ⋅ Click the “MS Outlook” tab. ⋅ Click “Refresh” to update data from MS Outlook. ⋅ Name, Home Tel, Mobile, Office Fax, e-mail, Company and Job Title will be imported from Outlook Contact. Due Date, Start Date and Subject will be imported from Outlook Task. Date and Subject will be imported from Outlook Calendar. Date and Subject will be imported from Outlook Note. Click “Copy To Device” to transfer all data to the right panel.
⋅ Click “Sync” to download all data to the device. ⋅ ⋅ ⋅ ⋅ ⋅ Only Shipping List record can be created in the program. Contact, Tasks, Calendar and Notes record should be edited by Outlook. Click “Safely remove USB Mass Storage Device” on Windows Task Bar. Disconnect the USB cable. All downloaded data can be viewed on the device.