Use and Care Guide

Technical
Data Sheet
UNICORN SPiT
PAINT, GEL STAIN AND GLAZE
UNICORN SPiT |USA/CAN/MEX/EU/ME/AU/NZ|Rev 10|Effective: 2.28.20/Approved: TMorgan/ MStark (6.12.19) CBetrabet(1/17/17) Page | 5
8. Seal with FAMOWOOD GLAZE COAT or most any oil-based coating/sealer. For
better protection and a higher gloss, repeat coats of sealer as indicated on
the product’s instructions. High gloss sealers will help achieve a three
dimensional look.
TIPS TO CREATE VARIOUS FINISHES: Intermingle chalky paint finishes or metallic
spray paint with Unicorn SPiT to achieve unique finishes. Top coats or finishes must be
oil-based. Water-based coatings will alter the look of Unicorn SPiT.
CUSTOM COLORS: Most water-based paints (chalk style or mineral based) can be
mixed with Unicorn SPiT to create custom colors.
TINTING FAMOWOOD GLAZE COAT EPOXY RESIN WITH UNICORN SPiT
Use Unicorn SPiT as a tinting agent to add brilliant color (or Unicorn SPiT SPARKLiNG
for color AND sparkle) to epoxy projects. Famowood Glaze Coat High Gloss Finish or
Famowood Glaze Coat High Gloss CRAFT Resin is recommended. For all other brands,
test before use.
DIRECTIONS:
1. Measure and mix Famowood Glaze Coat High Gloss Finish or Famowood
Glaze Coat High Gloss CRAFT Resin as directed.
2. Quickly add drops of undiluted Unicorn SPiT to achieve your desired
color. DO NOT use more than 1 part Unicorn SPiT to 5 parts epoxy.
Remember…A tiny bit of Unicorn SPiT goes a long way.
3. If multiple colors are desired, gather smaller containers to work with in
advance. Then measure, mix and pour Glaze Coat epoxy immediately into
smaller containers and add Unicorn SPiT.
4. Pour tinted epoxy onto your project and finish your masterpiece! For best
results, a pour thickness of no more than 1/16” is recommended.
5. Please follow epoxy pouring, curing and clean-up instructions.
HEALTH
and
SAFE
T
Y
Before working with this product, read and become familiar with information
concerning hazards, proper use and handling.
To request a Safety Data Sheet, please send an e-mail to sds@eclecticproducts.com
.
LIMITED WARRANTY
The product is warranted against any defect in materials or workmanship under normal use for a period of
180 days after the date of purchase. The product is also warranted under any implied warranties provided
under applicable law, including, without limitation, the implied warranty of merchantability and the implied
warranty of fitness for a particular purpose, for a period of 180 days after the date of purchase. The
manufacturer will not accept liability for more than product replacement. This warranty covers only the
original buyer of the product. For warranty service, the buyer should contact the store where the product
was purchased, or write Eclectic Products LLC, P.O. Box 4450, Pineville LA 71361 or call 1-800-767-4667. Our
goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure. This warranty gives you specific legal rights, and
you also have other rights, which vary from province to province
.