Use and Care Manual

Technical
Data Sheet
UNICORN SPIT®
GEL STAIN AND GLAZE IN ONE!
UNICORN SPiT – Gel Stain and Glaze -- Effective: 1/16/17 Approved: TMorgan/CBetrabet P a g e | 4
 Continue to add or blend multiple colors to the surface in separate areas creating
designs to achieve the desired look.
 Allow to dry. Dry time is approximately 30-60 minutes (depending on material,
humidity and temperature) or until a chalky finish appears.
 After drying, lightly buff the surface with a fine grain sand paper (120-220 grit) or
extra-fine steel wool (following the grain) to remove any excess or clumps.
 Dust off thoroughly.
 Seal with FAMOWOOD GLAZE COAT or most any oil-based coating/sealer. For
better protection and a higher gloss, repeat coats of sealer as indicated on the
product instructions. High Gloss Sealers will help achieve a three dimensional
look.
TIPS TO CREATE VARIOUS FINISHES: Intermingle chalky paint finishes or metallic spray
paint with Unicorn SPiT to achieve unique finishes. Top coats or finishes must be oil-
based. Water-based coatings will alter the look of Unicorn SPiT.
CUSTOM COLORS: Most water-based paints (chalk style or mineral based) can be mixed
with Unicorn SPiT
®
to create custom colors.
LIMITED WARRANTY
The product is warranted against any defect in materials or workmanship under normal use for a
period of 180 days after the date of purchase. The product is also warranted under any implied
warranties provided under applicable state law, including, without limitation, the implied warranty
of merchantability and the implied warranty of fitness for a particular purpose, for a period of 180
days after the date of purchase. This warranty covers only the original buyer of the product. For
warranty service, the buyer should contact the store where the product was purchased, or write
Eclectic Products, Inc., P.O. Box 4450, Pineville LA 71361 or call 800.767.4667. This warranty gives
you specific legal rights, and you also have other rights, which vary from state to state.