User's Manual

Note: • To clear a mistake while entering the frequency,
press (decimal key) repeatedly until the
display is cleared.
• If you enter a channel or
frequency which is out of the
scanner’s range, a beep will
sound and ERROR appears on
the display.
• You can change a channel or
frequency by using VFO.
To switch the setting for VFO
control, press and hold
HOLD/MAN for 2 seconds to
toggle between ROTARY:
CHANNEL or ROTARY:
FREQUENCY on the display.
• After programming frequencies for each bank, you
can also change the step size or the mode.(See
page 101)
Editing a Stored Frequency
1. Press MENU/BACK.
2. Select SCAN OPTION-CONVENTIONAL by rotating
the VFO and pressing E.
3. Select the channel number by rotating the VFO and
pressing E.
4. Edit the frequency by using
(decimal key) or the keypad and
pressing E.
Duplicate Frequency Alert
If you enter a frequency which has been stored in another
channel, you will hear a beep and the channel stored displays
WARNING.
Press (decimal key) to clear and start again.
––– OR –––
Press E again to store the frequency in both channels.
Transfer Frequencies
You can transfer a frequency that has been stored in a
channel to another channel.
1. Press HOLD/MAN.
.
.
.
27
C 010
512.0000 NFM
ERROR
OUT OF CHANNEL
C 010
512.0000 NFM
ERROR
OUT OF BAND
C 010
512.0000 NFM
WARNING
DUPLICATE 17
BC250D 9/20/2 2:52 PM Page 27