User's Manual

Programming Scan Lists During Search

To select a Scan List location and store an ID during Search

mode, follow these steps:

1. When your scanner stops on an ID

you want to store, press HOLD/MAN.

2. Press TRNSFR and the empty Scan

List appears on the display, then press

E. In case you want to change the

memory location, you can change it by

rotating the VFO.

3. Press RSM to return to Trunk Tracking Search mode.

Deleting a Stored ID

To delete a stored ID:

a. Press HOLD/MAN.

b. Rotate the VFO to select the

Scan List location you want to

delete.

c. Press 0.

d. Then press E.

Moving between Scan List Memories

There are a number of ways to step and move through your

Scan List memories:

1. Press HOLD/MAN and rotate the VFO to move to up or

down.

2. Or, press HOLD/MAN, next press 0-9 (scan list number),

then press 0-9 (memory position), for example. To move

to Scan List 4, memory position 10, press: HOLD/MAN, 4,

0, HOLD/MAN

Set ACTIVITY ID to ON, when your scanner finds any other

active ID during a transmission is received, the active ID

appears every 0.5 seconds.

I-Call (Motorola/EDACS)

I-Calls are direct unit-to-unit transmissions that are not heard

by other system users. Your BC250D can receive these

transmissions. How you receive I-Calls depends on whether

you are in Search or Scan mode.

M ID:4128

867.8375 NFM

Bank:04 MOT TYP2

BC250D 9/20/2 2:52 PM Page 59