User's Manual

program the Control Channel frequency into Memory

and press and hold the TRUNK key to identify the

frequency as trunked.

Disconnect Tone Detect Option (End Code)

When this function is disabled, the radio looks for squelch

before returning to the Control Channel instead of waiting for

the Disconnect Tone. Only in rare instances will you need to

adjust the default settings.

The condition to return to Control Channels depends on

whether the signal is present or not.

To set this function to on/off, select SCAN OPTION -

TRUNK - select bank number - END CODE

(MOTOROLA).

Select DETECT or IGNOR you want to set.

EDACS SCAT

With the EDACS SCAT feature turned “ON”, the data stream

transmissions will be eliminated allowing you to clearly

monitor the voice communications on EDACS SCAT systems.

To monitor EDACS SCAT systems you only need to turn this

feature EDCS SCT. “ON” with designated frequency. You

do not need to enter group ID’s.

Note: As EDACS SCAT is different from the other tracking

feature, and it is not a feature which the scanner

tracks any ID, you do not need to program TALK

GROUP ID in the menu mode.

BC250D 9/20/2 2:52 PM Page 74