User's Manual

4. Select APCO Card - ENABLE by rotating the VFO and

pressing E, and exit from this menu mode and APCO 25

CARD INSTALLED appears on the display. You can

use APCO Project 25.

Precautions for Installing the BCi25D Card

1. Do not touch the BCi25D card without first removing the

static electricity from your body. Touch any metal to

release static electricity build-up before you touch the

BCi25D card.

2. Turn Off the scanner, before inserting the BCi25D card

into the slot.

3. Hold the BCi25D card by its edges when inserting it into

the slot.

4. Do not touch any of the terminals. The BCi25D is a

sensitive electrical device.

5. Do not operate with an open battery compartment cover.

This exposes the circuitry to dust and other environmental

particles that cause the unit to function improperly.

6. When you remove the BCi25D card, pull out the ribbon.

BC250D 9/20/2 2:52 PM Page 76