User's Manual
2.
Select the bank by entering the letter for the bank you entered
on the worksheet next to
Bank
. This bank is where the
frequencies you enter will be stored.
3.
Select EDACS scanning by turning the rotary tuner or
repeatedly pressing
HOLD
U
or
LIMIT
V
to select the EDACS
scanning choice you entered next to
Scan Type
:
z
Ed-Hi
(Wideband, 9600 bps)
z
Ed-Lo
(Narrowband, 4800 bps)
z
Ed-SCt
(SCAT)
Then press
E
.
4.
Enter the talk group ID (agency, fleet, and subfleet) for the
system you want to scan, then press
E
.
If the system uses multiple talk group IDs, repeat Step 4.
5.
Use the keypad to enter the frequency you entered on the
worksheet under
Frequency
for LCN1, then press
E
.
Note: To clear a mistake while entering a frequency, press
.
(decimal) on the keypad twice, then repeat Step 5.
6.
Repeat Step 5 for each frequency you entered on the
worksheet under
Frequency
. When you enter a frequency,
select the next channel
by turning the rotary tuner or
repeatedly pressing
HOLD
U
or
LIMIT
V
to select the next
channel in the bank. Then press
E.
294/305ページCONTENTS
2004/04/01file://¥¥Fileserv0¥OM¥UB322ZBC898¥Software%20Help.htm