User's Manual
Using the Frequency Window
In the Frequency Window, you can enter information about a specific
channel including the
frequency, a description of the frequency, whether the frequency is a
trunked frequency
or not, and other information.
To enter a frequency, click on the Frequency field to the right of the channel
you want, then type
in a frequency.
To enter a description, click on the Description field for the channel you
want, then type in the
description.
To enter a trunked channel, double click on the Trunk field for the channel
you want.
On
appears.
To remove the trunk designation, double click on the field again.
On
disappears.
To turn on attenuation for a channel, double click on the ATT field for the
channel you want.
On
appears. To remove attenuation, double click on the field again.
On
disappears.
To turn on delay for a channel, double click on the Delay field for the
channel you want.
On
appears. To remove delay, double click on the field again.
On
disappears.
To turn on record for a channel, double click on the Record field for the
channel you want.
On
appears. To remove record, double click on the field again.
On
disappears.
To select the mode for a channel, click on the Mode field for the channel you
want.
A pulldown menu appears with 5K, 6.25K, 12.5K, and 25K. Then select the
option you want.
To select the step for a channel, click on the Steps field for the channel you
want.
A pulldown menu appears with AM, FM, NFM, and AUTO. Then select the
29/305ページCONTENTS
2004/04/01file://¥¥Fileserv0¥OM¥UB322ZBC898¥Software%20Help.htm