User's Manual
option you want.
To select whether a channel has tone, click on the Tone field for the channel
you want.
A pulldown menu appears with a blank space, CTCSS, and DCS. Then
select CTCSS
(if the channel has CTCSS tone), DCS (if the channel has DCS tone), or the
blank space
(if the channel has no tone).
To turn on lockout for a channel, double click on the L/O field for the channel
you want.
L/O
appears. To remove lockout, double click on the field again.
L/O
disappears.
To set a channel as the priority channel in the bank, double click on the
Priority field for
the channel you want.
Pri
appears. To remove priority, double click on the
field again.
Pri
disappears.
Using the Trunking Window
In the Trunking Window, you can enter up to 10 individual talk group ID
numbers into each list entry.
By grouping talk group ID numbers in separate lists, you can easily enable
or disable each list so
you hear only certain types of communications while scanning. For
example, put as many as 10
police talk group ID numbers into one list entry, as many as 10 public
service talk group ID
numbers into another list entry, as many as 10 tactical talk group ID
numbers into another list
entry, and so on.
To enter a talk group ID number, click on the IDs field to the right of the talk
group ID you want,
then type in each talk group ID number you want in the list entry. You can
enter up to 10 talk
group ID numbers in each list entry. Otherwise, if the trunking system is an
EDACS or Motorola
Type I or Type 2 system, enter a dash (-).
To enter a description of the talk group ID numbers in the list entry, click on
List
Entr
y
30/305ページCONTENTS
2004/04/01file://¥¥Fileserv0¥OM¥UB322ZBC898¥Software%20Help.htm