User's Manual
Using the Trunking Record Window
In the Trunking Record Window, you can enter information about a specific
channel including the
type of trunked system, whether the trunk bank is on or off, whether the
status bit is on or off,
and other information.
Note: Depending on the type of trunking system you select, some of the
options described
below might not apply to that system. For example, if you select Motorola
Type 1 (or Hybrid)
in the System Select field, you can enter information in the User Fleet Map
Setting fields but
cannot enter information in the Base/Space/Offset fields. Consult your
scanner’s Owners Manual
for more information about how to determine optimum settings for each type
of trunking system.
To select the type of trunking system, click on System Select. A pulldown
menu appears with
system type options. Then click on the system type to select it.
Notes:
z
When you select a trunking system type, the software automatically
fills in some options for you.
Always select the type of trunking system first before selecting any
other options in this window.
Otherwise, the software might unexpectedly change selections you
have already made.
32/305ページCONTENTS
2004/04/01file://¥¥Fileserv0¥OM¥UB322ZBC898¥Software%20Help.htm