User's Manual
1.
Press
MANUAL
.
2.
Use the keypad to enter the lowest frequency within your
search range. For example, if you want to search 155.000
MHz through 157.000 MHz, enter 155.000 MHz.
3.
Press
LIMIT
V
.
4.
Use the keypad to enter the highest frequency within your
search range. For example, if you want to search 155.000
MHz through 157.000 MHz, enter 157.000 MHz.
5.
Press
LIMIT
V
.
6.
Press
SRC
.
7.
Press
HOLD
U
when the scanner stops at the frequency you
want.
Notes:
o
You can press
HOLD
U
to step up a frequency or
press
LIMIT
V
to step down a frequency. Hold down
either key to rapidly step through the frequencies.
o
You can also use the rotary tuner to skip through
frequencies. Make sure
FREQ
is lit before turning the
dial.
8.
Press
E
to store the frequency in the channel flashing on the
display.
— or —
.
Send the frequency to another channel.
For information about sending a frequency to another
channel, see Transferring a Programmed Frequency
.
9.
Press
MANUAL
or
SCAN
to cancel a search.
10.
Repeat Steps 6 through 8 for each search frequency you want
to store.
87/305ページCONTENTS
2004/04/01file://¥¥Fileserv0¥OM¥UB322ZBC898¥Software%20Help.htm