User's Manual
Setting the Modulation Mode
Radio transmissions are modulated in several different ways.
The BC898T is able to demodulate the most common transmission
types. Your scanner has the most common modulation mode preset
for each band, so you seldom have to change this option. However
there are occasional services that use a modulation mode that is
not standard for that band.
To change the modulation mode, press
MANUAL
then repeatedly
press
MODE
until the modulation mode you want flashes.
Setting Priority Channels
You can set one conventional channel in each bank as a priority
channel. When you turn on the priority scan option (see Priority
Scanning), the scanner automatically checks these channels every
2 seconds to see if there is activity. If there is, the scanner
immediately switches to the priority channel.
Notes:
z The scanner does not check priority channels in locked-out
banks.
z The scanner does not check priority channels if the channel is
locked out.
By default, the first channel of each bank is set as priority. To
change the priority channel:
1.
Manually select the channel you want to set as the priority
channel.
2.
Hold down
PRI
for about 2 seconds. The scanner beeps and
the new priority assignment is made.
89/305ページCONTENTS
2004/04/01file://¥¥Fileserv0¥OM¥UB322ZBC898¥Software%20Help.htm