User's Manual

3.
Select Motorola scanning by turning the rotary tuner or
repeatedly pressing
HOLD
U
or
LIMIT
V
to select one of the
following Motorola scanning choices:
z
E2-800
(Motorola Type 2 800 MHz)
z
E2-900
(Motorola Type 2 900 MHz)
z
E2-Hi
(Motorola Type 2 VHF)
z
E2-UHF
(Motorola Type 2 UHF)
z
E1
(Motorola Type 1)
Then press E.
4.
Use the keypad to enter the first frequency, then press
E
.
Note: To clear a mistake while entering a frequency, press . (decimal) on the keypad
twice, then repeat Step 4.
5.
Repeat Step 4 for each additional frequency. When you enter a frequency, select the
next channel by turning the rotary tuner or repeatedly pressing
HOLD
U
or
LIMIT
V
to select the next channel in the bank. Then press
E
6.
If the system type is a Motorola Type 1 or hybrid Type I/Type II, select a fleet map.
Otherwise, skip to Step 7.
a. Turn the rotary tuner or repeatedly press
HOLD
U
or
LIMIT
V
until
E1
appears.
Then press
E
.
b. Select the fleet map list by turning the rotary tuner or
repeatedly pressing
HOLD
U
or
LIMIT
V
until
FLEEt
appears. Then press
E
.
c.
Select a preset fleet map from the list by turning the
rotary tuner or repeatedly pressing
HOLD
U
or
LIMIT
V
until the fleet map you want appears (
P1
to
P12
). Then press
E
.
7.
If the system type is a Motorola Type II VHF or Motorola Type
II UHF, enter the band plan (base frequency, spacing
frequency, and offset channel) for the system you want to
scan. Otherwise, stop here.
a. Turn the rotary tuner or repeatedly press
HOLD
U
or
LIMIT
V
until
bASE
appears. Then press
E
.
b.
Select the band plan by pressing
A
,
B
, or
C
.
c.
Use the keypad to enter the base frequency, step frequency, and channel offset.
Then press
E
.
d. If the system uses more than one band plan, repeat Steps a-c.
8.
Enter the talk group ID for each group you entered:
91/305ページCONTENTS
2004/04/01file://¥¥Fileserv0¥OM¥UB322ZBC898¥Software%20Help.htm