User's Manual
Filling Out The Motorola Worksheet
z
System Name
Fill in the general type of frequencies to be stored in this
bank. For example, if you want to store all police frequencies
in this bank, enter “Police.” If you want to store more than
one type of frequency in the bank, you can enter “Mixed.”
z
System Type
Fill in the type of Motorola system you are scanning.
{
Type 1. A fleet map is supplied for this type of system.
{
Type 2 800 MHz. The supplied frequencies are between
800 MHz and 899 MHz. No fleet map is supplied for this
type of system.
{ Type 2 900 MHz. The supplied frequencies are
between 900 MHz and 999 MHz. No fleet map is
supplied for this type of system.
{ Type 2 UHF. The supplied frequencies are between 400
MHz and 500 MHz. No fleet map is supplied for this type
of system.
{
Type 2 VHF. The supplied frequencies are between 100
MHz and 200 MHz. No fleet map is supplied for this type
of system.
z
Bank
Your scanner has 10 banks. Fill in the letter of the bank (A-
J) you want to use to store all the frequencies on this page.
You can use more than one page for the same bank.
z
Frequency/Name
For each channel, fill in each frequency and name used by
the agency.
z
Talk Group ID/Name
Identifies the agency. The talk group ID is sent by the
agency on the radio system’s control channel, and appears
on your scanner’s display when the talk group is active. You
can group the talk group IDs you want to hear into their own
groups, then write that ID and a name identifying its agency
here.
Fill in the talk group ID and a name for each agency.
174/305ページCONTENTS
2004/04/01file://¥¥Fileserv0¥OM¥UB322ZBC898¥Software%20Help.htm