User's Manual

100
Ap pe ndix
Conventional Scanning Worksheet
Instructions
Important: The conventional scanning worksheet is for
conventional frequencies only. To program LTR trunk-
ing frequencies, use “” on Page 111. To program
Motorola trunking frequencies, use “Motorola Trunking
Worksheet” on Page 106. To program EDACS trunk-
ing frequencies, use “EDACS Trunking Worksheet” on
Page 108.
Tip: If you transfer a frequency to another channel or
bank, be sure to update your worksheet with the new
information.
Filling Out The Conventional Scanning
Worksheet
Name
Fill in a name that describes the frequencies you want to
store. For example, you can enter "Dallas Police" or
"Amateur Radio" in this field. If you want to store more
than one type of frequency, you can enter "Mixed."
Channel
Fill in the channel number where you want to store each
frequency.
Tips:
• Try to enter frequencies you write on the
worksheet into consecutively numbered
channels. This makes it easier to keep track of how
many channels you have used.
• Leave this field blank until you gather all information
about the frequencies you want to store. Then go
back and fill in a channel number for each frequency
you entered, beginning with the first open channel if
possible.
Frequency
Fill in the frequency you want to store in this channel.