User's Manual

47
Special Features
•Press Func + or Func + to select a
skipped frequency while
HOLD appears. L/O
appears when you select a skipped frequency.
Delay
Sometimes a user might pause before replying to a
transmission. To avoid missing a reply on a specific
channel, you can program a 2-second delay into any
channel or frequency. The scanner continues to
monitor the channel frequency for an additional
2 seconds after the transmission stops before
resuming scanning or searching. The scanner
automatically sets a delay when you store
frequencies into channels or when you search
frequencies. When the delay feature is on,
DLY
appears. If it is off, follow one of these steps to
program a delay depending on how the scanner is
operating,.
• If the scanner is scanning and stops on an active
channel where you want to store a delay, quickly
press Func + Dly before it continues scanning
again.
DLY appears.
• If the desired channel is not selected, manually
select the channel, then press Func + Dly.
DLY
appears.
• If the scanner is searching, press Func + Dly
while the scanner is searching.
DLY appears
and the scanner automatically adds a 2-second
delay to every frequency it stops on in that band.
To turn off the 2-second delay, press Func + Dly
while the scanner is monitoring a channel, scanning,
or searching.
DLY disappears.