Owner's Manual
Expanding Your Phone
Expanding Your Phone [14]
www.uniden.com
Register the ELX500 expansion handset to main base
Before registering the extra handset, the battery pack MUST be charged for 10 hours.
Place the ELX500 handset in the main base unit to begin registration. You can also
register the handset manually.
Registering ELX500 handsets
1) From the base, press
menu/select and select
System
Setup
menu.
2) Select
Register Handset
,
and press menu/select.
3) On the handset, press and hold # until you hear beep.
Registering TCX800 and TCX860 Handsets
1) Press and hold the
Registration button on the back of the base.
2) Keep pressing the Registration button on the base until the handset charge on
main base start to blink.
3) On the handset, press and hold # until you hear beep.
While the handset is registering,
Handset Registering
will appear in the LCD. When
Registration Complete
is displayed, the handset has been registered to the base. If
Registration Failed
appears, please try these steps again.
0
4GIKUVGT*CPFUGV
/'55#)'
$NWGVQQVJ
5[UVGO5GVWR
5'.'%6
UP742.book Page 14 Tuesday, November 30, 2004 2:42 PM