Owner's Manual

Setting the Ringer Options
[31] Setting the Ringer Options www.uniden.com
Storing Ringer Tones
1) Connect the audio recording cable to the handset and sound source (e.g.stereo
or cd player). Insert one end of the audio recording cable into the handset's
headset jack and the other end into the sound source.
You can also simply use the handset's microphone by holding the handset close
to the sound source.
2) Go to
Rec/Edit Rings .
3) Select a location from 1-5, and press the OPTIONS soft key.
4) Use the up/down key to select
Record . To start recording,
press the RECORD soft key. The LCD displays
20 and then
begins to count down.
5) When you are finished recording, press the STOP soft key. The
phone will play the recorded ringer. To record another ringer,
press the ReRec soft key.
6) Enter the title of this ringer (up to 12 digits) using the number
keypad,
*
/tone, #, the DELETE soft key, right, or left key.
7) Press menu/select, you will hear a confirmation tone, and
Done! appears.
Playing the Ringer
1) Go to
Rec/Edit Rings .
2) Select a ringer to play, and press the OPTIONS soft key.
3) Use the up/down key to select
Play . To start playing, press
menu/select. To stop, press menu/select again.
4GEQTF4KPIGT
6Q5VCTV
4GEQTFKPI2TGUU
4'%14&
4'%14&

1RVKQPU
2NC[
4GEQTF
%JCPIG6KVNG
&GNGVG

5'.'%6
UP742.book Page 31 Tuesday, November 30, 2004 2:42 PM