Owner's Manual

Multi-Handset Features
Multi-Handset Features [58] www.uniden.com
Multi-Handset Features
The features in this section require a minimum of two handsets to operate. To add
additional handsets to your system, see "Expanding Your Phone" on page 12.
Using DirectLink Mode
In DirectLink Mode, a pair of handsets
can function as two-way radios.
DirectLink Mode does not interfere with
the main base's ability to make or
receive telephone calls. You must set
both handsets to DirectLink Mode to
make a directlink call.
To enter DirectLink mode, Select Direct Link option in the main
menu. And then press the ENTER soft key.
Direct Link Mode
Complete
appears.
To make a DirectLink call, press the DirectLink soft key. Select the handset you
want to call. To cancel the call, Press end. To answer a DirectLink call, Press the
Answer soft key. Press end when you want to hang up.
5'.'%6
  &KTGEV.KPM
•If the party is out of
range,
No Signal
appears in the display,
and the operation will
be canceled.
•While a pair of
handsets are in
DirectLink mode, they
cannot be used to
make or receive calls.
Other handsets can
still make and receive
calls.
note
UP742.book Page 58 Tuesday, November 30, 2004 2:42 PM