Owner's Manual Part 1

Expanding Your Phone
Expanding Your Phone [14] www.uniden.com
Connect the expansion handset's charger
The handset is powered by a rechargeable
battery pack. The battery recharges
automatically when the handset is placed
in the charger.
1) Connect the AC adapter to the DC IN 9V jack
and to a standard 120V AC wall outlet.
2) Set the charger on a desk or tabletop, and
place the handset in the charger with the
top panel facing forward.
3) Make sure that the charge LED illuminates.
If the LED does not illuminate, check to see
that the AC adapter is plugged in and the
handset makes good contact with the base
charging contacts.
4) Charge the handset battery pack for at least
15-20 hours before using your new cordless
telephone for the first time.
Register the Handset
Handsets supplied with the phone are registered to the base by the factory. When
charged, pre-registered handsets display a handset ID number. Handsets that have
not been registered display MUST place the handset in base to register! Models may
vary, refer to owners manual for
IWKFCPEG in the LCD, and *CPFUGVOWUVDG
TGIKUVGTGF
in the sub LCD. When you register an extra handset to the base, the
handset ID will be assigned. Only one handset can be registered at a time.
•Use only the supplied
AD-xxxx AC adapter.
Do not use any other
AC adapter.
•Your phone maybe
compatible with other
Uniden 5.8Ghz Digital
Expandable Systems.
Look for the technology
icon on our boxes or
visit our website for a
list of compatible
models.
note
UP744.book Page 14 Friday, November 5, 2004 4:22 PM