Owner's Manual Part 1
Expanding Your Phone
[15] Expanding Your Phone
www.uniden.com
Register the ELX500 expansion handset to main base
Before registering the extra handset, the battery pack MUST be charged for 15-20
hours.
To ELBT5 series base
1) From the base, press the MENU soft key, and select
5[UVGO5GVWR
menu.
2) Select
4GIKUVGT*CPFUGV
,
and press menu/select.
3) On the handset, press and hold # until you hear beep.
To ELT5 series base
1) Press and hold the Registration button on the back of the base.
2) Keep pressing the Registration button on the base until all LEDs on main base
start to blink.
3) On the handset, press and hold # until you hear beep.
4) While the handset is registering,
*CPFUGV4GIKUVGTKPI
will appear in the LCD. When
4GIKUVTCVKQP%QORNGVG
is displayed, the handset has been registered to the base.
If
4GIKUVTCVKQP(CKNGF
appears, please try these steps again.
Register the TCX800 and TCX860 Backward/Forward Compatible Handsets to
main base
To register the TCX800 or TCX860 handset, do the following steps of "To ELBT5
series base" above.
1) Press and hold the
Registration button on the back of the base.
2) Keep pressing the Registration button on the base until all LEDs on main base
start to blink.
3) On the handset, press and hold # until you hear beep.
0
4GIKUVGT*CPFUGV
/'55#)'
$NWGVQQVJ
5[UVGO5GVWR
5'.'%6
UP744.book Page 15 Friday, November 5, 2004 4:22 PM