Owner's Manual Part 1

Setup Menu

Setup Menu [34]

www.uniden.com

Vibrate Pattern (Handset Only)

You can choose a vibrate pattern (4 patterns (1-4) and Off). To set Vibrate Alert, go

8KDTCVG2GVVGTP

and select Tel Type (LAND or MOBILE), and then select the

pattern. A confirmation tone tells you that Vibrate Pattern is active.

Customize Your Own Distinctive Ringer Tones

Your phone can store up to 5 different

recordings to use as ringer tones (a total of

100 seconds). Each recording must be less

than 20 seconds long.

Storing Ringer Tones

1) Connect the audio recording cable to the handset and sound source (e.g.stereo

or cd player). Insert one end of the audio recording cable into the handset's

headset jack and the other end into the sound source.

You can also simply use the handset's microphone by holding the handset close

to the sound source.

2) Go to

4GE'FKV4KPIU

3) Select a location from 1-5, and press the OPTIONS soft key.

4) Use up/down key to select

4GEQTF

. To start recording, press

the RECORD soft key. The message counter displays



and

then begins to count down.

To the

sound source

To the

headset jack

4GEQTF4KPIGT

6Q5VCTV

4GEQTFKPI2TGUU

4'%14&



UP744.book Page 34 Friday, November 5, 2004 4:22 PM