Owner's Manual Part 1

Using Bluetooth Feature
[39] Using Bluetooth Feature www.uniden.com
Using Bluetooth Feature
Registering Your Cellular Phone to Your Phone
If your cellular phone is a Bluetooth v 1.1 compliant, and if you register the
cellular phone to the phone, the phone allows you to use the mobile line in
addioton to usual land line. To register the cellular phone, do the following steps:
Before you can use a bluetooth feature, you must pair cellular phones with the
phone. Once you have paired your cellular phone with the phone, you do not have
to pair it again until you want to use it with another phone.
1) Prepare your cellular phone according to the cellular's owner's manual on pairing.
2) When the phone is in standby mode, press
menu/select
on the base.
3) Select
5[UVGO5GVWR menu, and then $NWGVQQVJ .
4) Use up/down key to select
5GNGEV /QDKNG , and then
press menu/select.
5) Use up/down key to select a slot to be registered and
press the OPTIONS soft key.
6) Use up/down key to select
2CTKPI . and then press
menu/select.
7) Enter the pin code using the number From the cellular
phone keypad, and then press menu/select. Pairing
(registration) will start.
When pairing is completed successfully, you will hear a confirmation tone, and
2CTKPI5WEEGUUHWNN appears on the base. If pairing failed. 2CTKPIHCKNGF6T[
CICKP
appears.
5'.'%6
0
5[UVGO5GVWR
)NQDCN
$NWGVQQVJ
/'55#)'
UP744.book Page 39 Friday, November 5, 2004 4:22 PM