Owner's Manual Part 1

Using Your Phone
Using Your Phone [48] www.uniden.com
3) Dial the number.
If you need the phone to pause before dialing more digits (for example, to enter
an access code or extension), press menu/select, and select
2CWUG'PVT[ from
the list.
2 appears in the display, which represents a 2-second pause.
4) Press talk/flash or the LAND soft key for Land line.
For Mobile line connection, press the MOBILE soft key. Use up/down key, to select
the cellular phone to use and press the CONNECT soft key.
From the Handset Speakerphone
1) Remove the handset from the charging cradle.
2) Flip the top panel up.
3) Press (Speaker Phone) on the side of the handset.
4) Listen for the dial tone.
5) Dial the number.
6) When the other party answers, talk into the microphone
in the bottom of the handset.
In the list for MOBILE
line, select the
cellular with *.
cellular without *means
the cellular is out of
range, or other handset
or the base is in use.
note
UP744.book Page 48 Friday, November 5, 2004 4:22 PM