User manual

35
Special Features
8. When you select the option, press /Clr to start
Close Call search. Otherwise, to continue
normal scanning, repeatedly press Func until
disappears then press Scan/Src.
Using Close Call RF Capture
To turn on the Close Call feature, press Func then
Hold/ except in program search or program
mode. appears Every 2 seconds, the scanner
checks for frequencies in the range you specified in
“Setting the Close Call Options” on Page 33 and
interrupts the audio when it checks for a Close Call
transmission in that range.
Notes:
• Set the squelch tight (where only strong signals
are received) while using Close Call.
• To continue scanning normally while the Close
Call feature is working, simply press Scan/Src
twice. When the scanner finds a frequency, it
sounds the alert you specified in “Setting the
Close Call Options” on Page 33, and Found
flashes. Press any key to confirm the displayed
frequency. Press Scan/Src to resume scanning.
• To change the band, press Hold/ to stop
searching, then press Func. You can select the
band using 2/ or 8/ .
To turn on the Close Call feature and turn off normal
scanning, press (Func + Hold/ ) twice. flashes.
To turn off Close Call and turn on normal scanning,
press (Func + Hold/ ) three times. disappears.
Close Call Skip Memory
You can skip Close call frequencies so that you can
avoid unwanted frequencies or those already stored
in a channel. See page 43 for further explanation of
Skip Memory.
F
UB340ZH Paper OM reduced size.fm Page 35 Monday, September 26, 2005 2:56 PM